With the UL633N using IR communication,, the SF601 can be used in three different automatic modes
Automatic-Spot Alignment, SpotLok and Spot-Match and in addition in a manual/display (Spot Search)
mode.
Automatic-Spot Alignment
: SF601 guides the beam to the target
point in the horizontal axis, while the Z-axis grade value will be maintained.
Used for first and second day alignment (
pipe laying applications
).
Using
SpotLok mode
(like PlaneLok) aligns and holds the plumb beam automatically
to the SF601 center point (both axes) until exiting this mode.
Automatic-Spot-Match:
(
like Grade Match- two existing elevation points will be
connected to measure the grade value between these two points
) aligns the
plumb beam automatically to the SF601 center point (both axes) and moves
back to Z-axis automatic mode while displaying the measured Z-axis grade
value.
Note.
When Automatic Spot Alignment and Automatic Spot-Match have
been completed, the UL633N turns off the fan beam automatically.
Note:
With a quick press and release of the SF601 power button, the fan beam lens at the UL633N will be
activated/deactivated while a previous activated auto mode will be exited.
2
1
Z%
3
Spot Finder SF601 for vertical UL applications
1
2
3
