manualshive.com logo in svg

Speck pumpen VH 110, Руководство по эксплуатации

Поделиться
Скачать
Speck pumpen VH 110 Скачать руководство пользователя страница 23

 

Operating Instructions 

 

 

10/2010 

1096.0799 | VU / VH Series 

23 

7.5.4 

Disassembly of VU 20/40, VH 20/40/60 

 

Cross-sectional drawing VU 20/40 

 Cross-sectional draw-

ing, page 48 

 

Cross-sectional drawing VH 20 - 60 

 Cross-sectional 

drawing, page 60 

 

The pump has been removed from the system and is 

stored in a clean and level assembly area. 

1. 

Disassembly of bearing housing and suction casing 

 

Bring the pump into an upright position (drive side 
pointing up). 

 

Remove the fitting key (940) from the pump shaft 
(211). 

 

Loosen the hexagon head screws (901.1) on the bear-
ing cover (360), take off the bearing cover. 

 

Loosen the hexagon nuts (920), remove the hexagon 
nuts and the casing bolts (563). 

 

Pull the bearing housing (330) and the rolling bearing 
(320) off the pump shaft. 

 

Remove the shaft sealing casing (441) from the suc-
tion casing (106). 

2. 

Disassembly of mechanical seal (RU 1) (

 Preparations for 

assembly, page 26) 

 

Pull the rotating unit of the mechanical seal (047) off 
the pump shaft (211). 

 

Remove the suction casing (106) and pull the ring 
(500.2) off the pump shaft. 

3. 

Disassembly of inter casings, stage casings and impellers 

 

Pull the inter casing (137), stage casing (110) and im-
peller (230) off the pump shaft (211). 

 

Remove the fitting key (940.1) from the pump shaft. 

Additional steps for VH 20/40/60 

 

Pull the inter casings (137.1/137.2), stage casing 
(110) and impeller (230.1) off the pump shaft 
(211). 

 

Remove the fitting key (940.1) from the pump 
shaft (211). 

 

Remove the inter casing (137.3). 

4. 

Disassembly of bearing housing and discharge casing 

 

Rotate the pump 180° (drive side pointing down). 

 

Loosen the hexagon head screws (901.1) on the bear-
ing cover (360.1), take off the bearing cover. 

 

Remove the locking ring (932) from the pump shaft 
(211). 

 

Pull the bearing housing (330), rolling bearing (320) 
and ring (500.1) off the pump shaft (211). 

 

Remove the shaft sealing casing (441) from the dis-
charge casing (107). 

5. 

Disassembly of mechanical seal (RU 2) (

 Preparations for 

assembly, page 26) 

 

Remove the pump shaft (211) from the discharge cas-
ing (107). 

 

Pull the rotating unit of the mechanical seal (047) and 
the ring (500.2) off the pump shaft (211). 

6. 

Disassembly of mechanical seal (SU 1/2) (

 Preparations 

for assembly, page 26) 

 

Push the stationary units of the mechanical seal 
(047/047.1) out of the shaft sealing casings (441). 

7. 

Additional steps for VH 20/40/60 

Disassembly of central inter casings 

 

Separate inter casings 137.1 and 137.2. 

 

Remove the ring (500) and the packing gland 
(461) from the inter casings (137.1/137.2). 

7.5.5  Disassembly of VU 80/140/220 

VH 110/140/180 

 

Cross-sectional drawing VU 80 - 220 

 Cross-sectional 

drawing, page 48 

 

Cross-sectional drawing VH 110 -180 
 

 Cross-sectional drawing, page 60 

 

The pump has been removed from the system and is 

stored in a clean and level assembly area. 

1. 

Disassembly of pipes (not applicable to VU 80/VH 110) 

 

Loosen the hexagon nuts (920/920.1), remove the 
pipes (700/700.1) and seals (400). 

2. 

Disassembly of bearing housing on suction casing (drive 
side) 

 

Remove the fitting key (940) from the pump shaft 
(211). 

 

Loosen the hexagon head screws (901.1) on the bear-
ing housing (330), pull the bearing housing with the 
rolling bearing (320) off the pump shaft (211). 

3. 

Disassembly of mechanical seal (RU 1) (

 Preparations for 

assembly, page 26) 

 

Loosen the hexagon head screws (901.1) on the shaft 
sealing casing (441). 

 

Pull the shaft sealing casing (441) and the rotating unit 
of the mechanical seal (047) off the pump shaft (211). 

4. 

Disassembly of bearing housing on the discharge casing 
(non-drive side) 

 

Loosen the hexagon head screws (901.1) and take off 
the bearing cover (360.1). 

 

Loosen the lock washer (931.1) and the shaft nut (921) 
and pull them off. 

 

Loosen the hexagon head screws (901.1) and pull the 
bearing housing (330) with the rolling bearing (320) off 
the pump shaft (211). 

5. 

Disassembly of mechanical seal (RU 2) (

 Preparations for 

assembly, page 26) 

 

Loosen the hexagon head screws (901.1) and pull the 
shaft sealing casing (441) off the pump shaft (211). 

 

Pull the rotating unit of the mechanical seal (047.1) off 
the pump shaft (211). 

6. 

Disassembly of suction casing 

 

Rotate the pump 90° (drive side pointing up). 

 

Loosen the hexagon nuts (920.1), remove the nuts and 
casing bolts (563). 

 

Remove the suction casing (106). 

7. 

Disassembly of stage casing and pump shaft 

 

Remove the stage casing (110). 

 

Remove the pump shaft (211) with the impeller (230). 

With VH 110/140/180 

 

Remove the pump shaft (211) with the inter cas-
ings (137.1/137.2) and impellers (230/230.1). 

 

Remove the stage casing (110.1). 

8. 

Disassembly of impeller and pump shaft 

 

Loosen the shaft nut (922) and the lock washer (931) 
at the drive side and, together with the impeller (230), 
pull them off the pump shaft (211). 

Additional steps for VH 110/140/180 

 

Remove the fitting key (940.1) from the pump 
shaft (211). 

 

Pull the inter casings (137.1/137.2) jointly off the 
shaft sleeve (523). 

 

Pull the impeller (230.1) and the shaft sleeve 
(523) off the pump shaft. 

 

Pull the fitting key (940.1), the shaft nut (922) and the 
lock washer (931) off the pump shaft (211). 

Содержание VH 110
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды