Soyer UVR-300, Руководство по эксплуатации, Страница: 49 / 64

Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik 49
7.8 Adjusting the universal feeder
Various adjustments can be made to the universal feeder to optimise operation and to
eliminate operational process malfunctions. For this, please also refer to chapter
“9.1
Eliminating malfunctions at the universal feeder
” on page 57.
7.8.1 Adjusting the blow air regulator
Figure 11: Blow air regulator UVR-300 (UVR-400 is similar)
Item Designation
a Manometer
b Pressure regulator
Pull out to make the adjustment, push back in after adjusting the pressure.
The blow air regulator is used to set the pressure
for transporting the studs through
the stud feed hose to the gun or head.
The required pressure depends, for example, on the stud diameter and weight, as well
as on the length of the stud feed hose.
Please observe the maximum permitted pressure (see technical data, chapter
“6.5
Technical data for the universal feeder
“ from page 24).
).