Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik
39
Replacing the connection piece for the stud feed hose
Step 4:
Ensure that the safety interlock (a) moves freely and smoothly.
Step 5:
Insert the correct hose connection (a).
Ensure that the spring-loaded pin clicks into place (see step 2).
Step 6:
Insert the correct stud feed hose.
Ensure that the hose end is clean, straight and free of burrs. Lightly
chamfer the internal diameter of the hose, to avoid studs becoming
stuck (e.g. with the 60° countersink F04922 from SOYER
®
).
Insert the hose into the connection piece until the stop.
The hose connection has been replaced.