manualshive.com logo in svg

South bend SB1097, Руководство пользователя, Страница: 7 / 60

Поделиться
Скачать
South bend SB1097 Скачать руководство пользователя страница 7

South Bend Tools

For Machines Mfd. Since 02/21

Model SB1097

-5-

I N T R O D U C T I O N

Product Specifications

Model SB1097

Page 1 of 2

Model SB1097

6" x 108" VS Oscillating Edge Sander

Product Dimensions

Weight............................................................................................................................................................. 495 lbs.
Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 60 x 28 x 43 in.
Footprint (Length x Width)................................................................................................................. 32 x 19-1/2 in.

Shipping Dimensions

Type.......................................................................................................................................................... Wood Crate
Content.......................................................................................................................................................... Machine
Weight............................................................................................................................................................. 597 lbs.
Length x Width x Height................................................................................................................... 58 x 30 x 44 in.
Must Ship Upright................................................................................................................................................ Yes

Electrical

Power Requirement......................................................................................................... 220V, Single-Phase, 60 Hz
Full-Load Current Rating.................................................................................................................................... 19A
Minimum Circuit Size.......................................................................................................................................... 30A
Connection Type..................................................................................................................................... Cord & Plug
Power Cord Included............................................................................................................................................. Yes
Power Cord Length............................................................................................................................................ 68 in.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included........................................................................................................................................................ Yes
Included Plug Type............................................................................................................................................ L6-30
Switch Type............................................................................................... Magnetic Switch w/Overload Protection
Inverter (VFD) Type............................................................................................................ Kinco CV100-2S-0022G
Inverter (VFD) Size............................................................................................................................................ 3 HP

Motors

Main

Horsepower............................................................................................................................................... 3 HP
Phase.................................................................................................................................................... 3-Phase
Amps.......................................................................................................................................................... 9.5A
Speed................................................................................................................................................ 1725 RPM
Type........................................................................................................................................ TEFC Induction
Power Transfer ...................................................................................................................................... Direct
Bearings................................................................................................ Shielded & Permanently Lubricated

Main Specifications

Operation Information

Sanding Belt Speed................................................................................................................. 600 - 6000 FPM
Sanding Belt Oscillations....................................................................................................................... 1/4 in.
Sanding Belt Length.............................................................................................................................. 108 in.
Sanding Belt Width................................................................................................................................... 6 in.
Sanding Belt Tilt.............................................................................................................................. 0 - 90 deg.

Model SB1097

Page 1 of 2

Model SB1097

6" x 108" VS Oscillating Edge Sander

Product Dimensions

Weight............................................................................................................................................................. 495 lbs.
Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 60 x 28 x 43 in.
Footprint (Length x Width)................................................................................................................. 32 x 19-1/2 in.

Shipping Dimensions

Type.......................................................................................................................................................... Wood Crate
Content.......................................................................................................................................................... Machine
Weight............................................................................................................................................................. 597 lbs.
Length x Width x Height................................................................................................................... 58 x 30 x 44 in.
Must Ship Upright................................................................................................................................................ Yes

Electrical

Power Requirement......................................................................................................... 220V, Single-Phase, 60 Hz
Full-Load Current Rating.................................................................................................................................... 19A
Minimum Circuit Size.......................................................................................................................................... 30A
Connection Type..................................................................................................................................... Cord & Plug
Power Cord Included............................................................................................................................................. Yes
Power Cord Length............................................................................................................................................ 68 in.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included........................................................................................................................................................ Yes
Included Plug Type............................................................................................................................................ L6-30
Switch Type............................................................................................... Magnetic Switch w/Overload Protection
Inverter (VFD) Type............................................................................................................ Kinco CV100-2S-0022G
Inverter (VFD) Size............................................................................................................................................ 3 HP

Motors

Main

Horsepower............................................................................................................................................... 3 HP
Phase.................................................................................................................................................... 3-Phase
Amps.......................................................................................................................................................... 9.5A
Speed................................................................................................................................................ 1725 RPM
Type........................................................................................................................................ TEFC Induction
Power Transfer ...................................................................................................................................... Direct
Bearings................................................................................................ Shielded & Permanently Lubricated

Main Specifications

Operation Information

Sanding Belt Speed................................................................................................................. 600 - 6000 FPM
Sanding Belt Oscillations....................................................................................................................... 1/4 in.
Sanding Belt Length.............................................................................................................................. 108 in.
Sanding Belt Width................................................................................................................................... 6 in.
Sanding Belt Tilt.............................................................................................................................. 0 - 90 deg.

Содержание SB1097





























































Отзывы:

Нет отзывов