South bend SB1097, Руководство пользователя, Страница: 21 / 60

South Bend Tools
For Machines Mfd. Since 02/21 Model SB1097
-19-
P R E P A R A T I O N
10. Attach dust port to end of sander with (4)
1
⁄
4
"-20 x
1
⁄
4
" Phillips head screws and
1
⁄
4
" flat
washers (see Figure 24).
Figure Figure 24. Main dust port installed. . Main dust port installed.
Dust Port Dust Port
12. Align auxiliary dust hood hinges with sander
hinges shown in Figure 26 and secure with
remaining (2) hinge pins by tapping pins
with rubber mallet until fully seated.
13.
Latch belt door latch shown in Figure 27.
x 4
Figure Figure 26. Auxiliary dust hood installed. . Auxiliary dust hood installed.
Sander Sander
Hinges Hinges
Hinge Pin Hinge Pin
(1 of 2) (1 of 2)
Auxiliary Auxiliary
Dust Hood Dust Hood
11. Fully insert end table shaft into machine
arm mount and secure with
3
⁄
8
"-16 x 1"
handle (see Figure 25).
Figure Figure 25. End table installed. . End table installed.
Handle Handle
Arm Arm
Mount Mount
End Table End Table
Shaft Shaft
Figure Figure 27. Belt access door latched closed. . Belt access door latched closed.
Belt Door Belt Door
Latch Latch