South bend SB1097, Руководство пользователя, Страница: 31 / 60

South Bend Tools
For Machines Mfd. Since 02/21 Model SB1097
-29-
O P E R A T I O N
Adjusting Main Table
The table on the oscillating edge sander moves
both vertically and horizontally to accommodate
various workpiece shapes and thicknesses.
Adjust the table height periodically to reduce
spot wear of the sanding belt. Adjust the table
clearance whenever the table height or platen
tilt has been adjusted to maintain a safe distance
between the platen and table.
Adjusting Main Table Height
1. Loosen (2) main table height lock handles
(see Figure 44).
2. Turn main table height handwheel clockwise
to raise table or counterclockwise to lower
table (see Figure 44).
Figure Figure 44. Main table height adjustment controls. . Main table height adjustment controls.
3. Tighten main table height lock handles to
secure setting.
Main Table Main Table
Height Height
Handwheel Handwheel
Main Table Height Main Table Height
Lock Handle Lock Handle
(1 of 2) (1 of 2)
2. Push or pull main table until there is a gap
of no more than
1
⁄
16
" from sanding belt (see
Figure 45).
Figure Figure 45. Main table clearance adjustment controls. . Main table clearance adjustment controls.
Main Table Main Table
Lock Levers Lock Levers
Maximum Maximum
1 1
//
16 16
" Gap " Gap
3. Lock table lock levers to secure table
position.
Adjusting Main Table Clearance
1. Move (2) main table lock levers (see Figure
45) to loose position as illustrated by labels
on machine.
Adjusting Miter Gauge
4. Tighten lock knob from Step 2 to secure.
The miter gauge needs to be adjusted
perpendicular to the face of the belt when it is
mounted in the table slot.
To adjust miter gauge:
1. DISCONNECT MACHINE FROM POWER!
2. Loosen lock knob shown in Figure 46.
3. Rotate miter gauge until pointer on scale
indicates desired angle (see Figure 46).
Lock Knob Lock Knob
Pointer Pointer
Scale Scale
Figure Figure 46. Miter gauge adjustment components. . Miter gauge adjustment components.