South bend SB1097, Руководство пользователя, Страница: 35 / 60

South Bend Tools
For Machines Mfd. Since 02/21 Model SB1097
-33-
O P E R A T I O N
4.
Attach spindle to roller using screws
removed in Step 3 (see Figure 55).
6. Slide desired sanding drum onto spindle and
secure with (1)
5
⁄
16
"-18 x
1
⁄
2
" flange bolt and
5
⁄
16
" flat washer (see Figure 57).
7. Insert spindle rod into hole in base of spindle
to anchor it and tighten flange bolt from
Step 6 (see Figure 57).
Figure Figure 56. Location of table insert and flat head . Location of table insert and flat head
screws. screws.
Spindle Rod Spindle Rod
Figure Figure 55. Attaching spindle to roller. . Attaching spindle to roller.
Spindle Spindle
3. Remove (3) cap screws and roller cover from
roller (see Figure 54).
Figure Figure 54. Location of roller cover and cap screws. . Location of roller cover and cap screws.
Figure Figure 57. Anchoring spindle to tighten flange bolt. . Anchoring spindle to tighten flange bolt.
5. Remove 4" table insert on end table by
removing (3) flat head screws shown in
Figure 56.
8. Install smallest table insert that will fit
around sanding drum with screws removed
in Step 5 (see Figure 58).
Figure Figure 58. Table insert, sanding drum, and spindle . Table insert, sanding drum, and spindle
installed. installed.
Table Insert Table Insert
Roller Cover Roller Cover
Roller Roller
4" Table Insert 4" Table Insert
x 3
x 3
!
!