Soredex DIGORA Optime DXR-50 001, Руководство пользователя

Страница: 30 / 58

24 User’s manual 204253
Imaging plate unit 3. Setup options
3. Setup options
There are several setup options in the dental imaging
software that allow you to set the image quality to your
requirements.
To select the setup options:
1. From the dental imaging software you are using
select Setup > Scanner page.
3.1 Tooth numbering
Numbers can be assigned to the teeth that appear on
the image.
Selecting the tooth numbering feature
1. In the Image Scanning section, click the Show
Image Preview and Dental Chart check box.
2. Click OK to close the window and activate tooth
numbering.
Using the tooth numbering feature
After an IP has been read a window will open that
shows the image and a tooth location map.
1. Click the tooth/teeth on the map that correspond
to the tooth/teeth in the image. Tooth numbers will
be assigned to the selected teeth.
The tools at the top of the window allow the image
to be manipulated.
2. Click OK to save the tooth numbers with the
image.