76
Chapter 8 SCSI Commands
Table 8.4.4.2 : TapeAlert page Specification
21
Autoloader Offline
I
The autoloader has been manually turned offline
and is unavailable for use.
Autoloader manually turned offline
22
Autoloader Drive
Offline
I
A drive inside the autoloader has been taken
offline.
This is for information purposes only. No action
is required.
Autoloader turned internal drive
offline
23
Autoloader Scan Retry
W
There is a potential problem with the barcode
label or the scanner hardware in the autoloader
mechanism.
1.No action needs to be taken at this time.
2.If the problem persists, call the customer
service.
The autoloader does not support this flag.
Operation to scan the barcode on a
cartridge had to perform an
excessive number of retries before
succeeding
24
Autoloader Inventory
C
The autoloader has detected a inconsistency in
its in its inventory.
1.Redo the autoloader inventory to correct
inconsistency.
2.Restart the operation Check the applications
users manual or the hardware users manual for
specific instructions on redoing the autoloader
inventory.
The autoloader does not support this flag.
Inconsistent media inventory
25
Autoloader Illegal
Operation
W
A autoloader operation has been attempted that
is invalid at this time.
The autoloader does not support this flag.
Illegal operation detected
26
Dual-Port Interface
Error
W
A redundant interface port on the autoloader has
failed.
The autoloader does not support this flag.
Failure of one interface port in a
dual-port configuration, e.g.
Fibrechannel.
27
Cooling Fan Failure
W
A autoloader cooling fan has failed.
One or more fans inside the
autoloader have failed.Internal flag
state only cleared when all fans are
working again.
28
Power Supply
W
A redundant power supply has failed inside the
autoloader. Check the autoloader users manual
for instructions on replacing the failed power
supply.
The autoloader does not support this flag.
Redundant PSU failure inside the
autoloader subsystem
29
Power Consumption
W
The autoloader power consumption is outside
the specified range.
The autoloader does not support this flag.
Power consumption of one or more
devices inside the autoloader is
outside specific range
30
Pass-through
mechanism failure
C
A failure has occurred in the cartridge pass-
through mechanism between two autoloader
modules.
The autoloader does not support this flag.
Error occurred in pass-through
mechanism during self test or while
attempting to transfer a cartridge
between autoloader modules
31
Cartridge in pass-
through mechanism
C
A cartridge has been left in the autoloader pass-
through mechanism from a previous hardware
fault. Check the autoloader users guide for
instructions on clearing this fault.
The autoloader does not support this flag.
Cartridge left in the pass-through
mechanism between two autoloader
modules
32
Unreadable bar code
labels
I
The autoloader was unable to read the barcode
on a cartridge.
The autoloader does not support this flag.
Unable to read a barcode label on a
cartridge during autoloader
inventory/scan
64
No.
Flag
Type Required Host Message
Cause
