66
Chapter 8 SCSI Commands
The format of the Identification Descriptor is as follows.
Table 8.2.2.3.2 : Identification descriptor
The Code Set field indicates how the Identifier field is encoded. The values are
defined as follows.
Table 8.2.2.3.3 : Code set
The Identifier type field indicates the type of value contained by the Identifier
field. The values are defined as follows.
Table 8.2.2.3.4 : Identifier type
The following shows the data supported by the autoloader.
Table 8.2.2.3.5 : Device identification page data
The data shown here contains "SONY Autoloader LIB-D81", a 10-digit serial
number, and an area reserved for an IEEE 64-bit Global Identifier (EUI-64).
Bit
Byte
7
6
5
4
3
2
1
0
0
Reserved
Code set
1
Reserved
Identifier type
2
Reserved
3
Identifier Length(n-3)
4
(MSB)
Identifier
13
(LSB)
Value
Description
0h
Reserved
1h
The identifier field contains binary values.
2h
The identifier field contains ASCII graphic codes.
3-Fh
Reserved
Value
Description
0h
No assignment authority was used and consequently there is no
guarantee that the identifier is globally unique.
1h
The first 8 byte of the identifier field are a Vendor ID.
2h
The identifier field contains an IEEE Extended Unique Identifier, 64-
bit (EUI-64).
3h
The identifier field contains a FC-PH 64-bit Name Identifier field.
4-Fh
Reserved
Byte
Description
00--15
00 83 00 34 02 01 00 24 53 4f 4e 59 20 20 20 20
...4..."SONY
16--31
41 75 74 6f 6c 6f 61 64 65 72 20 4c 49 42 2d 44
Autoloader LIB-D
32--47
38 31 20 20 31 32 33 34 35 36 37 38 01 02 00 08
81 12345678....
48-55
00 00 00 00 00 00 00 00
........
