Error Messages and Warning Messages
83
A
ppe
ndix
W030
NO SDI
INPUT A
No input on the HD SDI
IN A connector.
W032
INVALID SDI
DATA
Invalid input signal data
on the HD SDI IN
connector.
W034
SDI A-B
PHASE NG
The phase of the HD SDI
IN A connector and B
connector do not match.
W035
TARGET TC
MISMAT
The frequency of the
target time code
configured on the unit
and the HD SDI time
code input from the
camcorder do not match.
W038
NO SDI
INPUT B
No input on the HD SDI
IN B connector.
W039
NO AUX
INPUT
No input on the AUX IN
connector.
W03A AUX IN
PHASE NG
“AUX IN” is selected in
the AUDIO menu, but the
input signal of the AUX
IN connector and the
video signal input to the
unit are out of phase.
W03B AUX IN
UNLOCK
“AUX IN” is selected in
the AUDIO menu, but the
input signal of the AUX
IN connector and the
video signal input to the
unit is not locked.
W03C HD SDI OUT
NG
3G SDI OUT is not being
output properly.
W03D ENCODER
NG
Encoder initialization
failed.
W03E ENC
WARNING
Recording malfunction
(encoder error).
W03F
DEC
WARNING
Cannot playback data
from SRMemory card
(decoder error).
W050
WP SW ON
The SRMemory card
write-protect switch is set
to WP.
W051
FS LOCKED
The SRMemory card is
set to FS LOCK in the
SYSTEM menu.
W054
CONDITION
NG
Detected an SRMemory
card access error.
W055
PB NOT
READY
Not ready for playback.
Playback the file again.
Code
Message
Meaning
W057
REC
TRIGGER
MODE
A prohibited command
was executed from the
control panel while REC
TRIGGER is not set to
OFF.
W073
CAM ID
MISMATCH
The Camera ID
configured in FILE LIST
>CAMERA ID of the
SYSTEM Setup menu
does not match the card
information.
Code
Message
Meaning
