Sony SRR1, Руководство по эксплуатации

Страница: 39 / 109

How to Use the Recording and Playback Operation Buttons
39
Ch
apt
er 4
Re
co
rdin
g and Pl
ay
bac
k
1) E-E mode:
The state in which E-E signals can be monitored. This mode is used to, for example, check the input signal
before recording.
2) E-E (electric to electric) signal:
A signal which passes solely through internal circuitry, and not through pathways in which SRMemory card
takes place.
3) To perform precise search direction or search speed operations, use shuttle mode. (see page 36)
REW button and indicator
(PREV) Moves to the beginning of the current
file.
If this button is pressed when at the
beginning of the file, moves to the
beginning of the previous file.
If this button is pressed while a file in
the STOP state is not currently open,
moves to the beginning of the LAST
REC FILE. (Move operations are
disabled when POWER MODE is set
to “PB.”)
Tip
The SYSTEM Setup menu >PB
FUNCTION >NEXT/PREV setting
determines whether MARK IN points
are included in this function.
(see
page 72)
Executes a reverse direction search.
3)
With each press, the search speed
changes in the order of x2
t x5 t x8
t
x16
t
x32
t
x2 ...
If this button is pressed after a search is
interrupted by another operation, a
search is performed at the last speed
used during the previous search.
F FWD button and indicator
(NEXT) Moves to the beginning of the next
file.
If this button is pressed during the
STOP state, moves to the last frame
of the LAST REC FILE. (Move
operations are disabled when
POWER MODE is set to “PB.”)
To move to the last frame of the
currently playing file, press this
button while holding down the PLAY
button.
Tip
The SYSTEM Setup menu >PB
FUNCTION >NEXT/PREV setting
determines whether MARK IN points
are included in this function.
(see
page 72)
Executes a forward direction search.
With each press, the search speed
changes in the order of x2
t x5 t x8
t x16 t x32 t x2 ...
If this button is pressed after a search is
interrupted by another operation, a
search is performed at the last speed
used during the previous search.
PAUSE button and indicator Pauses recording/playback. (The
indicator flashes during pause.)
Pressing this button again resumes
recording/playback. Cues up to IN points if IN points are
set. If a last MARK IN point is set,
opens the MARK IN point.
(see
page 42)
Button Function when pressed alone Function when pressed with FUNC
button