Monitor LUT Function
94
A
ppe
ndix
To perform LUT conversion of monitor
output
Proceed as follows with a LUT file loaded into a
bank.
For the procedure to load a LUT file into a bank, see
“To load a LUT file into a bank” (page 92).
1
In the VIDEO Setup menu, select
LUT>LUT MODE.
A setup window opens.
2
Set LUT MODE to one of the following.
BANK0 [Bank 0]:
Select the LUT file of
BANK0.
BANK1 to BANK3 [Bank 1 to Bank 3]:
Select the LUT file of one of BANK1 to
BANK3.
FtH [Full to Head]:
Instead of applying a
LUT file, generate and display standard
video levels from 64 (0% black) to 940
(100% white) steps for signals that
exceed the HD video level range (10-bit
signal levels, 4 to 1019 steps).
Video converted on the basis of the selected
LUT is output.
To save LUT files to a “Memory Stick”
After loading a newly created or edited LUT file
into a bank on this unit, you can save it to a
“Memory Stick”.
1
In the VIDEO Setup menu, select
LUT>LUT MODE.
A setup window opens.
2
Select the bank of the LUT file that you
want to save.
3
Insert a “Memory Stick” with the folder
/MSSONY/PRO/SRMASTER/R1/LUT
into the Memory Stick slot.
4
In the VIDEO Setup menu, select
LUT>LUT SAVE.
5
Rotate the SELECT/ENTER dial to
select OK, and then press the dial with
the FUNC button held down.
To delete all LUT files from all banks
1
In the VIDEO Setup menu, select
LUT>LUT RESET.
A setup window opens.
2
Rotate the SELECT/ENTER dial to
select OK, and then press the dial with
the FUNC button held down.
All of the LUT files in Bank0 to Bank3 are
deleted.
Note
LUT files on a “Memory Stick” are not erased, even
if a “Memory Stick” is inserted when you perform
the above operation.
LUT Mode
V i d e o S e t u p
SR-R1
TCG
00:00:00:00
S T O P
LUT(Monitor)
LUT MODE
LUT STATUS
LUT LOAD
BANKO
LUT
LUT SAVE
LUT RESET
> Off <
Bank 0
Bank 1
Bank 2
Bank 3
Full to Head
Reset LUT
V i d e o S e t u p
SR-R1
TCG
00:00:00:00
S T O P
LUT(Monitor)
LUT MODE
LUT STATUS
LUT LOAD
BANK3
LUT
LUT SAVE
LUT RESET
Reset All
LUT Data ? Press
[FUNC]+[ENTER]
to Reset.
CANCEL
OK
