Sony KP-53XBR200 - 53" Projection Tv, Руководство по обслуживанию

Страница: 8 / 144

– 8 –
4
S-Link/CONTROL S cable
Sony connector for S-Link and CONTROL S
connections. These features are exclusive to
Sony products and allow greater control of
all Sony equipment.
Note:
• For S-Link and CONTROL S connections,
you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can
purchase a separate S-Link/CONTROL S
cable (RK-G69HG).
Making Connections
For the best picture quality, a cable TV
system or outdoor antenna is recommended.
Connecting directly to cable or an
antenna
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see
A
); older homes will probably have 300 -
ohm twin lead cable (see B ); still other
homes may contain both (see C ).
A
• VHF only
or
• VHF/UHF
or
• Cable
B
• VHF only
or
• UHF only
or
• VHF/UHF
C
• VHF
and
• UHF
Installing and Connecting the Projection TV (continued)
Antenna connector
(Rear of
projection TV)
VHF/UHF
300-ohm twin
lead cable
75-ohm
coaxial cable
Connector Types
You may find it necessary to use some of the
following connector types during set up.
Coaxial cable
Standard TV cable and antenna connector
S Video cable
High quality video connector for enhanced
picture quality
Audio/Video cable
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
(Some DVD Players are equipped with the
following three video connectors.)
Y - Green
C
B
(C
b
, B–Y or P
B
) - Blue
C
R
(C
r
, R–Y or P
R
) - Red
75-ohm coaxial cable
Plug Type
Screw-on Type
Screw into connection
Press into connection
Align guides and
press into connection
Press into connection
Press into connection
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
(Rear of
projection TV)
VHF/UHF
(Rear of
projection TV)
VHF/UHF
3
Mounting the Supplied Rear
Speakers
For enhanced surround effect, connect the
supplied rear speakers to your projection TV.
Connecting the rear speakers
Using the supplied speaker cord, connect
REAR SPEAKER OUT L on your projection
TV to the speaker terminal on one rear
speaker, and connect REAR SPEAKER OUT R
to the terminal on the other one.
Note:
• Match the colors of the speaker cords and
the terminals. If the colors are reversed,
sound will be distorted.
(Rear of projection TV)
Speaker cord (supplied)
Speaker (supplied) Speaker (supplied)
(Rear of projection TV)
Projection TV
Rear speaker
Left rear
speaker
Right rear
speaker
Installation
For optimum surround effect, mount the rear
speakers in the following places (as shown in
the illustration):
• on a wall, a little higher or lower than the
listener’s ears.
• on a table, a little lower than the listener’s
ears.
• on a corner of wall and ceiling.
L
R
REAR SPEAKER OUT(MIN 16 )