Sony KP-53XBR200 - 53" Projection Tv, Руководство по обслуживанию

Страница: 28 / 144

– 28 –
4 3
CHANNEL SKIP
Skip unnecessary
channels
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory. You can
also recover those channels again.
With the CHANNEL SKIP window open:
1 Move the joystick up or down to select the desired
channel. You can view the channel that is selected
with the CHANNEL SKIP menu in the center sub
screen. You can also use CH +/– or 0–9 and
ENTER buttons.
2 Press .
3 Move the joystick up or down to select YES, and press .
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
NO.
Using the CHANNEL SET
UP Menu
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 34.
To select the CHANNEL SET UP
menu:
Display
/
Highlight
/
Select
MENU
(continued)
CHANNEL SKIP
Select a channel
2 :
3 :
4 :
5 :
6 :
7 :
8 :
NO
NO
NO
NO
NO
NO
NO
NO
Move Select Exit MENU
1 :
CHANNEL SET UP
CHANNEL SKIP
CHANNEL CAPTION
CABLE : ON
AUTO PROGRAM
FAVORITE CHANNEL : AUTO
CHANNEL FIX : OFF
Move Select Exit MENU
4 4
CHANNEL
CAPTION
Easy recognition
of the channel
you are watching
CABLE
Cable system
setting
AUTO
PROGRAM
Automatic
channel presetting
You can add a caption for up to 32 channels of both
VHF/UHF and AUX inputs. You can make your own
caption.
With the CHANNEL CAPTION window open:
1 Press
and then move the joystick up or down to
select the desired channel. You can view the channel
that is selected with the CHANNEL CAPTION menu
in the center sub screen.
2 Press .
3 Move the joystick up or down to display the first letter
or number of the caption and press to select it.
Repeat until up to four digits are selected.
4 Press .
To erase a caption, press RESET.
Select ON if your projection TV is connected to a cable system.
Select OFF if your projection TV is connected to an antenna.
AUTO SET UP will set CABLE to OFF automatically if a cable channel is not
available.
Select YES to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
Select NO to cancel AUTO PROGRAM.
Adjusting Your SET UP (menus) (continued)
CHANNEL CAPTION
CAPTION : – – – –
Move Select Exit MENU
CHANNEL : – – –