Sony KP-53XBR200 - 53" Projection Tv, Руководство по обслуживанию

Страница: 21 / 144

– 21 –
2 9
(white labeled button)
(white labeled
button)
Press to select the TV channel of the picture on which the symbol
“
b
” (or “
B
”) is displayed. (for details, see “Watching the TV” on
page 25)
Press to change between the VHF/UHF input and the AUX input of the picture on
which the symbol “
b ” (or “ B ”) is displayed.
Press to alternate sound between the main picture and the window picture. The
symbol "
" will appear for a few seconds to indicate which picture's sound is being
received.
Great for copying down phone numbers, addresses, recipes, etc.
Press to freeze the main and window pictures. The symbols “
b ” and " ," and the
channel number disappear.
Press again to resume PIP viewing. Press
(OFF)
to cancel and resume normal TV
viewing.
Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be exchanged.
Press to access CHANNEL INDEX for direct channel selection. (see “Using
CHANNEL INDEX” on page 32)
Press to cancel PIP function and return to normal viewing.
Using the Yellow Labeled Buttons for PIP Operations.
Note:
• If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see “CHANNEL SKIP”
on page 43)
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
CH
or or
0 9
-
JUMP
and ENTER
ANT
AUDIO
FREEZE
SWAP
OFF
3 0
6 7
Main picture
TV channel or input-
source mode for the main
picture (It will dim about
3 seconds later.)
TV channel or
input-source mode
for the sub picture
(It will dim about
3 seconds later.)
Sub
picture
The Picture-and-Picture (P&P) feature allows
you to view two channels simultaneously,
both in a reduced size screen. The main
picture will appear on the right.
In this feature you can change the size of both
pictures as you like.
Watching Two Programs at One Time — P&P (Twin View
TM
)
Using Your New Projection TV (continued)
(white labeled
button)
Press to display right (main) and left pictures.
Press
(OFF) to remove the window picture.
Press and hold either RIGHT or LEFT to zoom in on the selected picture.
Release at the desired size. The other picture will be zoomed out
simultaneously.
Moving and holding the joystick right or left will activate the same function.
Press to allow you to alternate, between the right and left pictures, the
picture for which you can change the TV channel or video source using
the white labeled buttons below. The symbol “
b
” (or “
B
”) will appear, to
indicate which picture’s channel or input mode can be changed.
Press repeatedly to step through the available video inputs for the picture
on which the symbol “
b
” (or “
B
”) is displayed. (see “TV/VIDEO” on page
27)
Using the Yellow Labeled Buttons for P&P Operations.
TV/VIDEO
ACTIVE
LEFT RIGHT
ZOOM IN
The symbol “
≥
” indicates
which picture's sound is
being received.
The symbol “ b ” or “ B ”
indicates which picture's TV
channel or input source can be
changed.
or
LEFT
RIGHT