Sony KP-53XBR200 - 53" Projection Tv, Руководство по обслуживанию

Страница: 22 / 144

– 22 –
3 1
Note:
• If one of the pictures received
through P&P is snowy, the entire
screen may become unstable. In this
case, erase the snowy channel. (see
“CHANNEL SKIP” on page 43)
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
(white labeled button)
(white labeled
button)
Press to select the TV channel for the picture on which the symbol
“
b ” (or “ B ”) is displayed. (for details, see “Watching the TV” on
page 25)
Press to change between the VHF/UHF input and the AUX input of the picture on
which the symbol “
b ” (or “ B ”) is displayed.
Press to alternate sound between the right and left pictures. The symbol " " will
appear for a few seconds to indicate which picture's sound is being received.
Great for copying down phone numbers, addresses, recipes, etc.
Press to freeze both the right and left pictures.
Press again to resume P&P viewing or press
(OFF) to cancel and resume normal
TV viewing.
Press to switch the audio and video of the right and left pictures.
Each time you press SWAP, the picture and sound of the two will be exchanged.
Press to cancel P&P function and return to normal viewing.
Using the Yellow Labeled Buttons for P&P Operations.
CH
or or
0 9 -
JUMP
and ENTER
ANT
AUDIO
FREEZE
SWAP
OFF
3 2
Using CHANNEL INDEX
You can use the CHANNEL INDEX feature
to display multiple channels for direct
selection.
Channels used for CHANNEL INDEX will
come directly from the TV's list of receivable
channels (those set during AUTO PROGRAM
or through the CHANNEL SET UP menu).
1
Press .
The current channel will be reduced in
size and displayed in the center of the
screen in normal motion picture format.
The first twelve receivable channels will
appear one after another, clockwise,
surrounding the center picture.
These small pictures move and pause
alternately, in intervals of one second.
(The channel number and channel caption
(if set) on the second and later
appearances will dim.)
4
Press .
The center picture will be enlarged into
the whole screen for normal viewing.
Notes:
• You cannot move the cyan frame until all
of the surrounding pictures appear.
• The projection TV will continually update
each of the surrounding pictures while
the CHANNEL INDEX screen is
displayed.
• Sound will only be heard from the center
picture while the CHANNEL INDEX
screen is displayed.
• If one of the pictures received through
CHANNEL INDEX is snowy, the entire
screen may become unstable. In this case,
erase the snowy channel using
CHANNEL SKIP. (see “CHANNEL SKIP”
on page 43)
• If you leave the CHANNEL INDEX
screen displayed for an hour without any
operation, CHANNEL INDEX will be
canceled and normal picture appears.
Using Your New Projection TV (continued)
A cyan frame will appear to indicate
current channel selection.
2
Move the joystick in any of eight dirctions
to move the cyan frame to the picture that
you wish to view, and press
.
The selected channel will zoom in and
move to the center, and the sound of that
channel will be heard.
3
If you wish to view another channel,
repeat step 2.
To view the normal picture of the selected
channel, proceed to step 4.
10
R e c i i p e
f l o u r - - - - 2
s u g a r - - - 1/2
s a l t - - - - - 1/2 b u t t e r - - - 1
R e c i i p e
f l o u r - - - - 2
s u g a r - - - 1/2 s a l t - - - - - 1/2
b u t t e r - - - 1