Sony KP-53XBR200 - 53" Projection Tv, Руководство по обслуживанию

Страница: 48 / 144

– 48 –
KP-53XBR200/61XBR200
RM-Y902 RM-Y902
2
5
8
0
1
4
7
3
6
9
DISPLAY TV/VIDEO ANT
JUMP
ENTER
MENU
RESET
VOL CH
MUTING TV
OFF
AUDIO SWAP
TV/DBS
PICTURE
MODE
GUIDE ACTIVE
POTITION
LEFT RIGHT
ZOOM IN
FREEZE
POWER
SYSTEM
OFF
DVD/
VTR
DBS
CABLE
FUNCTION
DVD/VTR DBS/CABLE TV
CC
Category Adjustment item
DATA
(SCREEN DISPLAY)
SERVICE VDSP VPOS 31
0000 0
0000 00 00
PJED 000 000
FDIS
(H) (V)
GRN 000 000
CENT
3-10. REGISTRATION ADJUSTMENT
• ADJUST BUTTONS AND INDICATOR
MUTING
DISPLAY
Adjustment item
up
Adjustment item
down
TV POWER ON
Data up
(Rough adjustment)
Data down
(Rough adjustment)
Category down
Mode select
Rough adjustment
Fine adjustment
ENTER
" PJED "
data up/down
[Setup for Adjustment]
• Current flow in circuit should be stable before attempting
adjustment. (So wait about 5 minutes after turning on the
TV power switch.
• Use caution since this adjustment affects the [Green (Red,
Blue,) Registration] when performed as a rough adjust-
ment.
1. Generate a crosshatch signal and display it on the TV screen.
2. Place a cap over the red and blue picture tube guns and set to
green (color).
3. Place in test mode.
3-1. Turning on while in standby.
(with TV power switch off)
Press the remote control keys in the following order :
[DISPLAY] n
5
n [VOL+] n [TV POWER]
3-2. Turning on (with TV power switch is ON)
Open the top cover of the remote control.
Press the remote control keys in the following order :
[EJECT] n [REWIND] n [PLAY]
4. Shift to Sub-adjustment mode with key
5
on the remote
control.
5. Select “OSDH” “OSDV” with the
1
and
4
keys on the
remote control. Use the joystick key to move “OSDH” hori-
zontally and “OSDV” vertically, set the OSD in an easy to
see position.
6. Select “GRN CEN” with the
1
and
4
keys on the remote
control and check that the adjustment data is now “000” both
vertically and horizontally.
* You can now display the crosshatch pattern on
the screen by using the
6
key on the remote
control.
7. Shift to Main Test mode with the
2
key on the remote con-
trol.
8. Select “VPOS” “HPOS” with the
1
and
4
keys on the
remote control. Align the centers of “VPOS” and “HPOS”
with the
3
and
6
keys.
9. Shift to Subtest mode with the
5
key on the remote control.
SUB DEFLECTION ADJUSTMENT ITEM
Adjustment O : Yes – : No
Display Adjustment item
Adjustment type
GH GV RH RV BH BV
CENT CENT O O O O O O
SKEW SKEW O – O O O O
SIZE SIZE O O O O O O
LIN LIN – – O – O –
KEY KEY – – – O – O
PIN PIN – O – O – O
( )