Sony KP-53XBR200 - 53" Projection Tv, Руководство по обслуживанию

Страница: 49 / 144

– 49 –
KP-53XBR200/61XBR200
RM-Y902 RM-Y902
FIHP
FIHP
TPHP
GRN
PIN
GRN
PIN
<GREEN PINCUSHION>
1. Shift to Rough Adjustment mode with the
9
key on the re-
mote control.
2. Select “GRN PIN” with the
1
and
4
keys on the remote
control.
3. Adjust with the joystick keys on the remote control so that the
upper and lower horizontal lines changes from a crooked to
nearly a straight shape. (A slope on the line is okay.)
7. Select “TPHP” with the
1
and
4
keys on the remote control.
The marker will now appear so use the
1
and
4
keys on the
remote control to adjust to position the center of the marker
in the screen center.
8. Shift to Fine Adjustment mode with the
9
key on the remote
control and return the peak section data.
5. Shift to Rough Adjustment mode with the [9] key on the re-
mote control.
6. Change the FIHP value with the joystick key so that the tip of
the peak is in the center of the screen as shown below.
• Marker Movement
(A vortex shape as shown below appears when the
1
key
on the remote control is held down and when the vortex
reaches the upper right it again returns to the center of the
screen. Reverse this movement with the
4
key on the re-
mote control.)
is slow so increasing the data for the peak will
make it easier to see.
<GREEN CENTER ADJUSTMENT>
1. Select “GRN CENT” with the
1
and
4
keys on the remote
control.
2. Use the joystick key on the remote control and adjust the ver-
tical and horizontal section not possible in Main mode.
(See item 5 of “Setup for adjustment”.)
GRN
CENT
<GREEN SKEW>
1. Select “GRN SKEW” with the
1
and
4
keys on the remote
control.
2. Adjust with the joystick keys on the remote control so that
there is no slope on the vertical and horizontal center line.
GRN
SKEW
[GREEN REGISTRATION ADJUSTMENT]
<H-PHASE ADJUSTMENT(COHP, FIHP, TPHP)>
1. Select “COHP” with the
1
and
4
keys on the remote con-
trol and check that the data is “0”.
2. Select “F1HP” with the
1
and
4
keys on the remote control.
3. Shift to Fine Adjustment mode with the
9
key on the remote
control.
4. Move the joystick key to increase the peak vertically in the +
direction to form the peak as shown below.
* The speed at which changes in the peak occurs