Sony KD-34XBR2 - 34" Hdtv Fd Trinitron Wega, Руководство по обслуживанию

Страница: 279 / 342

Connecting and Setting Up the DTV
15
Connecting a VCR and Cable Box
Use this hookup if
❑
Your cable TV company scrambles some channels, but not all of
them (pay channels vs. regular cable channels), so you need to
use a cable box
❑
You want to use the Twin View or Scrolling Index feature.
With this setup you can
❑
Use the DTV remote control to change channels using your cable
box when the signal is scrambled.
❑
Use the DTV remote control to change channels using your DTV
when the signal is not scrambled. (Your DTV’s tuner provides a
better signal than the cable box.)
❑
Use the Twin View and Scrolling Index features.
❑
Record both regular cable TV and scrambled channels.
To connect a cable box and a VCR, you will need
❑
A small inexpensive device known as a splitter.
❑
Three short coaxial cables.
❑
Either a combination audio/video cable, or an S VIDEO cable
and audio cables.
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Use a coaxial cable to connect one of the two output jacks of the
splitter to the DTV’s CABLE jack.
3
Use a coaxial cable to connect the other output jack of the splitter
to the input jack of the cable box.
4
Use a coaxial cable to connect the output jack of the cable box to
the input jack of the VCR.
5
Use the video line (yellow) of a combination audio/video (A/V)
cable to connect the video output jack of the VCR to the video
input jack of the DTV.
6
Connect the left (white) and right (red) audio output channels of
the VCR to the respective input jacks on the DTV.
✍
If your VCR has an S VIDEO jack, you can substitute an S VIDEO cable for
the video line of an A/V cable. The S VIDEO cable will provide improved
video signal quality.
(Continued on the next page)