Sony HVO-500MD страница 11 Скачать руководство пользователя

Страница: 11 / 106

Table of Contents

Error Messages .............................................................................. 99
Troubleshooting .......................................................................... 101
Licenses .......................................................................................102

Specifications ..............................................................................103
Index ............................................................................................105

Trademarks

• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• The products or system names appearing in this document are trademarks or registered trademarks of their respective

owners.
Further, the

™

symbols are not used in the text.

• Reproduction or duplication, in whole or part, of the software or operation manual supplied with the recorder, as well

as renting or leasing of the software without the authorization of the right holder is prohibited under copyright law.

• Sony assumes no responsibility for damages, loss of income, or any claims from a third party arising out of use of

the recorder or supplied software.

• For complete terms and conditions of the warranty for the recorder, refer to the warranty card included in the pack-

age.

• The software supplied with the recorder cannot be used with any other recorders.
• It is not possible to install any software into the equipment other than the software supplied by Sony specifically for

use with the equipment.

• Note that the specifications of the recorder and supplied software are subject to change for improvement without

prior notice.

Содержание HVO-500MD











































































































Результаты поиска

Содержание HVO-500MD

Отзывы:

Похожие инструкции для HVO-500MD

Бренды по названию

Популярные бренды

Sony HVO-500MD, Инструкция по эксплуатации

Результаты поиска

Содержание HVO-500MD

Отзывы:

Похожие инструкции для HVO-500MD

Бренды по названию

Популярные бренды