28
Exporting Files
recorded to the tape. Clicking the button twice terminates
exporting instantly.
When “Insert” is set for EDIT MODE, clicking the
CANCEL button once terminates exporting instantly.
Error messages
The table below lists the error messages that are displayed
on the VTR during exporting and their meanings.
When one of the messages appears and ERR ABORT is set
to “enable,” exporting is aborted.
When ERR ABORT is set to “disable,” exporting
continues as long as possible even after an error message
appears. Note, however, that normal operational results
may not be guaranteed. It is recommended that ERR
ABORT be set to “enable” during normal use.
Export log display
Click the Export LOG button in the DISK CONTROL tag
display to open the export log display. You can view the
log for each export. Export log files are created for each
cassette ID (Tele-File ID) and information is added each
time the clips are exported to the same cassette tape.
To clear the contents of the export log display
Each sequence in the export log display can be cleared.
Click the DEL button at the beginning of the sequence
indication whose contents you want to clear.
To load a clip sequence from the export log
display
Open the VTR CONTROL tag display of the IMPORT
menu, and click the IMP button in the Sequence Info
column to load the selected IN/OUT points to the import
clip list.
For uncompressed data, it is difficult to specify IN/OUT
points while monitoring the picture. By using this function
instead, specifying IN/OUT points can be done easily.
Note
Message
Meaning
CH COND RED
The recording error rate of the tape
is high and the channel condition has
turned to red.
LOST LOCK
The servo has become unlocked
during recording.
TAPE END
The end of the tape has been
detected.
PB FORMAT
MISMATCH
The tape format does not match the
system setting.
DF/NDF MISMATCH The drop frame/non-drop frame
setting of the tape does not match
the system setting.
REC INHI
Recording is inhibited on the VTR or
the cassette is record-protected.
CANNOT SV LOCK
The servo cannot be locked to the IN
point.
PB PORTION
MISMATCH
During insert editing of
uncompressed data, the number of
the portions to be recorded and the
number of the portions on the base
recording do not match.
(This appears during the export of
uncompressed data only.)
UNEXPECTED VTR
MODE
During exporting, the VTR has
entered an unexpected operation
mode (e.g., playback was stopped
from the control panel of the VTR.).
VTR is LOCAL
The remote mode of the VTR is not
set to “NETWORK 2” at the start of
exporting. (When this message
appears, exporting will not take
place.)
