Sony HKSR-5804 Скачать руководство пользователя

Страница: 12 / 51

Proxy and GUI Settings

GUI MODE

Selects how the items in the
display are shown.
Tab

: Items are divided into

multiple tag displays.

Flat: Items are shown in one

display.

GUI EFFECT

Determines whether to apply
effects such as fade in/out when
switching to another display.
disable

: Effects are not applied.

enable: Effects are applied.

Note

When “enable” is selected, the
response of the computer when
switching to another display may
become extremely slow
depending on the computer in
use.

FORMAT

Selects the file type of the proxy
displayed on the GUI.
BMP: Bitmap
JPG

: JPEG

Note that the file type of the proxy
that is generated automatically
during file export is also
determined by this setting.

MODE

Selects the display mode of the
proxies that appear in the GUI
during tape playback.
Normal

: Displays the picture.

Waveform(Parade) : Displays the

waveforms (red, green, and
blue).

Waveform(Red): Displays the

waveform (red).

Waveform(Green): Displays the

waveform (green).

Waveform(Blue): Displays the

waveform (blue).

Vector: Displays the vector scope.
Vector(×2): Displays the vector

scope at 2-fold magnification.

WF TYPE

Selects the drawing method of the
waveform.
Dot

: Dots

Line: Lines

WF OVERLAY

Selects the display method of the
waveform(s).
off

: Does not display the picture.

Only the waveform(s) is (are)
displayed.

on: Waveform(s) is (are) displayed

over the picture.

on(Mix):Waveform(s) and the

picture are mixed and
displayed.

Item

Function/settings

WF ALPHA

Specifies the waveform
transparency when the
waveform(s) and the picture are
mixed.
Low

: Low transparency

Middle: Medium transparancy
High: High traneparency

AUTO GEN

Determines whether or not
proxies are automatically
generated.
disable: Proxies are not generated

automatically.

enable: When previewing files in

the clip list or when exporting
files, proxies are
automatically generated for
picture files that do not have
their own proxies.

enable(as Temporarily)

: Proxies

are generated for display on
the GUI. However, the
generated proxies are not
stored on the disk.

Note

Due to system limitations, during
the export of uncompressed data,
proxies are not generated for
main picture files that are greater
than about 62 MB.

Item

Function/settings

Содержание HKSR-5804




















































Результаты поиска

Содержание HKSR-5804

Отзывы:

Похожие инструкции для HKSR-5804

Бренды по названию

Популярные бренды

Sony HKSR-5804, Руководство по эксплуатации

Результаты поиска

Содержание HKSR-5804

Отзывы:

Похожие инструкции для HKSR-5804

Бренды по названию

Популярные бренды