19
Importing Files
clip_###_@@@@@@.dpx
Example of directory name
When “Make New Directories” is selected for the FILE
DIR box in the DISK CONTROL tag display, a new
directory is created right under the specified directory each
time a clip is imported.
The following example shows a directory name for which
“clip_” has been entered in the BASE NAME box of the
DISK CONTROL tag display.
XXXXXXXX/clip_###/
The following table explains the additional settings made
for the directory where main picture files that are imported
from the VTR to the NFS server are stored (target
directory).
The DISK CONTROL tag display is shown below.
For uncompressed data, the only items that must be
specified are the four items in the table below and the
target directory (step
2
in
).
In the table below, the default setting is indicated by an
asterisk (*).
Setting IN/OUT Points on a Tape
This section explains how to import files from a tape
loaded into the VTR. There are two ways to import files
from the tape: by specifying the section to be imported
while the tape is playing and by loading an EDL.
Specifying IN/OUT points while playing the
tape
1
Access the VTR from the web client to display the web
application, click the IMPORT menu select button,
and then click the VTR CONTROL tab.
The VTR CONTROL tag display opens.
For uncompressed data
Serial number that is added to each DPX file in
the clip. The default starting number is “000000.”
The starting number can be changed.
Sub ID for identifying clips that is added only when the
+SID box is checked. The default starting number is “000.”
File name entered in the BASE NAME box
Delimiter
Sub ID for identifying clips that is
added only when the +SID box is
checked. The default starting number
is “000.”
File name entered in the BASE NAME box
Specified directory
Item
Function/settings
FILE DIR
Specifies the directory where
imported picture files are stored.
Org Structure
*
: Imported picture
files are stored in the same
directory as the original files.
Org Structure (Under Selected Dir):
A directory with the same
structure as that of the original
files is created directly under the
specified directory. Picture files
are stored in the created
directory.
All Files into Selected Directory:
Picture files are stored right
under the selected directory.
OVERWRITE
Specifies the action to be taken
when the same file name already
exists in the directory where the file
is imported.
Keep Existing File
*
: The existing file
is not overwritten. (The imported
file is not saved with a different
name.)
Overwrite Existing File: The existing
file is overwritten.
IMPORT LOG
Specifies whether or not an import
log file is created and where the
created log file is stored.
The settings are the same as those
when importing compressed data
COMMENT
Enter comments here to be written to
the import log file.
For compressed data
