18
Importing Files
To delete a directory
Click the Select Directory box and select the directory
that you want to delete. Then click the RMDIR button.
3
Set the following items.
In the table below, the default setting is indicated by an
asterisk (*).
Example of file name
The following example shows a file name for which
“clip_” has been entered in the BASE NAME box of the
DISK CONTROL tag display.
Item
Function/settings
BASE NAME
Sets the base name of imported
files.
For details on how files are
named, see “Example of file
name” on page 18.
+SubID check box
When checked, a sub ID is added
to the picture file name and
directory name to identify the
clips. The sub ID is incremented
by 1 each time importing is
carried out.
Note
You should check this box when
multiple clips of the same name
are imported to the same
directory.
FILE DIR
Sets the directory where imported
picture files are stored.
Use Selected Directory: Imported
picture files are stored right
under the directory whose
name is currently displayed at
the center of the display.
Make New Directory
*
: A new
directory is created directly
under the specified directory
each time files are imported.
Imported picture files are
stored in the created
directory.
For details on how the created
directories are named, see
“Example of directory name” on
page 19.
+CasID check box
When checked, a directory with
the same name as the cassette ID
is created when picture files are
imported. The imported picture
files are stored in the created
directory.
START
Sets the starting serial number of
the file name (@@@@@@).
Note
A number exceeding 2147483647
(0x7fffffff) cannot be specified.
END
Shows the highest (last) serial
number of the file name.
TC check box
When checked, the value of the IN
point timecode converted into
frame count is set as the starting
serial number (@@@@@@) of
the file name.
For example, when the timecode
of the IN point is “01:00:00:00” at
24 PsF, the starting serial number
is “86400.”
DIGIT
Specifies the number of digits of
the serial number of the file name
(@@@@@@).
The default setting is six digits.
When the serial number of an
imported file exceeds six digits,
the number of digits is
automatically increased.
DELIMITER
Specifies the delimiter to be used
between the file name specified in
BASE NAME and the serial
number (@@@@@@).
“_” (underbar)
*
, “.” (period), or “-”
(minus) can be selected.
IMPORT LOG
Specifies whether or not an
import log file is created and
where the created file is stored.
Disable: An import log file is not
created.
Enable(Log Dir): The import log
file is stored in the directory
for log storage.
Enable(Selected Dir): The import
log file is stored right under
the specified directory.
To view the created import log file,
click the Import LOG button at the
lower right of the DISK CONTROL
tag display.
For details on the import log file,
see “Import log display” on page
22.
For details on how to manage the
import log file, see “Log File
Management” on page 36.
COMMENT
Enter comments here to be
written to the import log file.
Item
Function/settings
