22
Importing Files
When one of these messages appears with ERR ABORT
set to “enable,” importing is aborted.
When ERR ABORT is set to “disable,” importing
continues as long as possible even after an error message
appears. Note, however, that normal operational results
may not be guaranteed. It is recommended that ERR
ABORT be set to “enable” during normal use.
Import log display
Click the Import LOG button in the DISK CONTROL tag
display to open the import log display. You can view the
log for each import (sequence).
To clear the contents of the import log display
Each sequence in the import log display can be cleared.
Click the DEL button at the beginning of the sequence
indication whose contents you want to clear.
Note
Message
Meaning
CH COND RED
The playback error rate of the tape is
high and the channel condition has
turned to red.
LOST LOCK
The servo has become unlocked
during the playing of the tape.
TAPE END
The end of the tape has been
detected.
PB FORMAT
MISMATCH
The tape format does not match the
system setting.
DF/NDF MISMATCH The drop frame/non-drop frame
setting of the tape does not match
the system setting.
CANNOT SV LOCK
The servo cannot be locked during
the playing of the tape.
SYSTEM PORTION
MISMATCH
During the import of uncompressed
data, an unexpected discontinuity of
portion numbers has been detected.
(This appears during the import of
uncompressed data only).
UNEXPECTED VTR
MODE
During importing, the VTR has
entered an unexpected operation
mode (e.g., playback was stopped
from the control panel of the VTR).
VTR is LOCAL
The remote mode of the VTR is not
set to “NETWORK 2” at the start of
importing. (When this message
appears, clips are not imported.)
