31(E)
Warning Indications
If a warning error occurs during a normal operation,
the warning status appears on the display panel.
>IN USE
*
C
↑ ↑
Status display Warning code (flashing)
The contents of warning codes are as follows:
Display just after Display Contents
an error occurs
appears
later
>[W] PS FAIL
– –
*
P
Power supply block fail
Refer to Sony service
representative.
>[W] OVER HEAT
– –
*
H
Over heat of power block
Refer to Sony service
representative.
>[W] FAN FAIL
– –
*
A
Cleaning fan stop
Refer to Sony service
representative.
>[W] Auto CL FAIL
– –
*
E
Special eject auto cleaning fail
See “Special Eject Auto
Cleaning Function.”
>[W] RQ FM TAPE – –
*
F
Original tape request
See “Special Eject Auto
Cleaning Function.”
>[W] RQ CL TAPE
– –
*
C
Cleaning tape request
See “Special Eject Auto
Cleaning Function.”
>[W] SpcEjctDrv.
– –
*
S
Special Eject being performed
See “Special Eject Auto
Cleaning Function.”
(none)
– –
*
1
A tape streamer requires a
cleaning tape.
Refer to the operation manual
supplied with the tape streamer.
(none)
– –
*
Q
Inconsistency of the firmware
version
Refer to Sony service
representative.
Note
The higher warning indication in the table above has
the priority over the lower one when it is displayed.
