10(E)
Preparations
Checklist of Components
Check that the following are supplied with the unit.
• Front door keys (2)
• Shutter plate (1)
• Screws, M4
×
12 (8)
• Control cable (1)
Tape Streamer Mounting
Tape streamer mounting and removing should always
be carried out by a technician who has undergone the
appropriate service training.
Note that this unit only supports the tape streamer.
Removing the Elevator Shipping
Lock
After unpacking the unit, when powering it on for the
first time, remove the shipping lock which fixes the
elevator.
Use the following procedure to remove the screw of
the shipping lock.
Be sure to keep the shipping lock and screw in a safe
place, in case it is necessary to ship the unit again.
1
Confirm the POWER switch off.
2
Connect the power.
Connect the optional power cord between an AC
outlet and the AC IN connector on the rear panel of
this unit.
3
Turn the door key switch to the “Open” position.
4
Turn the POWER switch on.
The front door opens.
5
Remove the shipping lock screw.
Shipping lock
