Sony Clie PEG-N770C Скачать руководство пользователя страница 47

Страница: 47 / 132

tru

tio

Using your CLIÉ handheld

Tap

The record you selected is deleted.

If you select

Save archive copy on PC

, the deleted data from your CLIÉ handheld is saved to Palm™ Desktop for CLIÉ software during the next

HotSync

Categorizing entries

You can categorize the records you entered. This means you can then view the records by category.

To specify the category of address records, proceed as follows:

Tap the records you want to categorize.
The

Address

view appears.

Tap

Edit

The

Address Edit

screen appears.

Tap

Unfiled

in the top right-hand corner of the screen.

A list of categories appears.

Tap the required category.
The category is assigned to the records you selected.

Address Book menus

This section explains the menu commands specific to Address Book. The

Record

and

Options

menus differ

depending on the screen displayed.

Record menus

Duplicate Address

: Makes a copy of the current record and displays the copy in

Address Edit

so you can

make changes to the copied record. The copy has the same category and attached notes as the original
record.

Beam Address

: Sends only the selected address to another CLIÉ handheld via the infrared communications

port.

Содержание Clie PEG-N770C





































































































































Результаты поиска

Содержание Clie PEG-N770C

Отзывы:

Sony Clie PEG-N770C, Руководство по эксплуатации, Страница: 47 / 132

Результаты поиска

Содержание Clie PEG-N770C

Отзывы: