19
Operations on the Disc’s TOC Area
Adding Names Using the CD recorder
1
In stop mode, press the NAME button.
2
Select whether you want to enter the disc name
or track number.
Make the selection by turning the AMS control,
and then press the AMS control or the YES
button.
3
Enter the name.
The cursor will flash to show the position of the
character being input. Turn the AMS control to
select the character, and then press the AMS
control to verify the character and move the
cursor one place to the right.
Use the
m
button and
M
button to move
the cursor position left and right.
Press the CLEAR button to delete the character
on which the cursor is positioned, and to move
all of the following characters one place back.
Press the CHAR button to select the character
type. Pressing the CHAR button cycles through
“A”,“ a”, and “0” once each time the button is
pressed. Having selected the character type, turn
the AMS control to select the desired character.
4
Once the character has been entered, press the
YES button.
The CD recorder will return to disc or track
number selection status.
5
Repeat steps 2 to 4 to enter the desired track
and disc name.
6
Finally, press the MENU/NO button to quit the
name input setup menu screen.
Operations on the Disc
’s TOC Ar
ea
Adding Track Name and
Disc Name (NAME)
CD-R/CD-RW
You can add disc names and track names into discs in
CD-TEXT format.
The disc names and track names that have been
entered are written to the disc when the disc is
finalized. CD-TEXT information is not recorded in the
PMA area (page 11), but is directly recorded on TOC.
Consequently, enter the names just before finalizing the
disc.
Note: Removing discs or turning OFF the power
supply before the disc is finalized but a name has been
entered will result in the name data being lost.
You can record up to 23 characters each for disc name
and track name.
You can use the following characters.
Alphabet: A to Z, and a to z.
Numbers: 0 to 9
Symbols:
! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [
] ^ _
` { | }
_
(blank)
After entering the name, if you try to remove the
disc without finalizing, the following warning
message will be displayed: “Text Edited sure
Z
?” If
you do not want to save the name, press the
Z
button again within 4 seconds.
/
Содержание CDR-W66
Страница 39: ......
Страница 40: ...Printed in Japan ...