Sony CDR-W66, Руководство по эксплуатации

Страница: 7 / 40

7
es CHECK button
Displays the program details.
ed SBM/LIMITER/EQ control
Press to turn ON and OFF DSP (Digital Signal
Processing) effects.
ef
INPUT switch
Select sound source to be input to the CD recorder.
Back Panel Descriptions
Location and Function of Parts
Location and Function of Parts
5 6 7 8 9 q; qa qs qd qf qg qh
1 4 qj qk 2 3
eg REC LEVEL control
Use to adjust the analog input sound level.
eh PHONE LEVEL control
Use to adjust the volume of the headphones.
ej
PHONES jack
Connect headphones to this jack.
1 ANALOG (BALANCE) input terminal (XLR type)
Input the sounds of a device connected with an
XLR connector cable to the CD recorder as analog
data.
2 ANALOG (BALANCE) input level
Can adjust the level of analog (balance) input.
Normally, REC LEVEL on the front panel is set to
the position of 5, and then this LEVEL control is
used to set the reference level.
A
+ 4 dBu input signal is set to about –20 dB at the
level meter when the CD recorder is shipped from
the factory.
3 ANALOG (BALANCE) output level
Can adjust the level of analog (balance) output.
A –20 dB signal is set to be output at
+ 4 dBu at the
level meter when the CD recorder is shipped from
the factory.
4 ANALOG (BALANCE) output terminal (XLR type)
Output the sounds of the CD recorder to a device
connected with an XLR connector cable as analog
output.
5 ANALOG (UNBALANCE) input terminal
Input the sounds of a device connected with a pin
type connector cable to the CD recorder as analog
input.
6 ANALOG (UNBALANCE) output terminal
Output the content of the CD recorder to a device
connected with a pin type connector cable as
analog output.
7 DIGITAL (OPTICAL) input terminal
Connect to the OPTICAL digital output terminal of
a digital device.
8 DIGITAL (OPTICAL) output terminal
Connect to the OPTICAL digital input terminal of a
digital device.
9 DIGITAL (COAXIAL) input terminal
Connect to the COAXIAL digital output terminal of
a digital device.
q;
DIGITAL (COAXIAL) output terminal
Connect to the COAXIAL digital input terminal of
a digital device.
qa DIGITAL (AES/EBU) input terminal (XLR type)
Connect to the AES/EBU output terminal of a
digital device.
qs DIGITAL (AES/EBU) output terminal (XLR type)
Connect to the AES/EBU input terminal of a digital
device.
qd WORD SYNC input terminal (BNC type)
Connect to other device to input a word
synchronizing signal.
qf WORD SYNC input 75 Z terminal switch
ON: An input signal is terminated at 75 Z .
OFF: High impedance
qg DUPLICATE terminal
Connect to another CDR-W66 for double-speed
dubbing.
qh CTRL-S (Control-S) input terminal
Connect to the supplied remote controller or
another control device.
When the terminal is connected to the plug, the
infrared radiation of the remote controller is not
received.
qj PARALLEL terminal (D-sub 9-pin female)
Connect to a device consisting of simple circuits to
remotely control the functions preset in the CD
recorder.
qk RS-232C terminal (D-sub 9-pin male)
Connect to a device that controls the CD recorder
from the outside.