User Manual for the Type 8300 Compatt 6
(and Variants)
UM-8300-Compatt 6
Issue B3
3.
PASS
appears next to the
Test Sensors Check
button to indicate the test is successful. If the
test is unsuccessful the word
FAIL
appears.
Note
The Inclination values refer to the roll followed by pitch in degrees.
9.3.4 Checking the Release Mechanism
Before operating the release mechanism, ensure
is read and fully understood.
The following procedure describes the release mechanism check using 6G Terminal Lite.
Note
These checks can also be performed using the iWAND acoustic transponder; see UM-8315 “User
Manual for the Type 8315 iWAND”, Section “Test Release”.
1. Make sure the Dual Serial Cable is connected to the transponder; see
.
2. Check the position of the release mechanism
, to see if it is in the fully open position (
) or fully closed position (
).
Section 9 – Functional Test
69