User Manual for the Type 8300 Compatt 6
(and Variants)
UM-8300-Compatt 6
Issue B3
13. The firmware update will commence (this process will take approximately 4-5 minutes).
14. When the new firmware update has completed, a
Reprogramming Succeeded
notification will
be displayed on the DAS home page window.
15. Click
Exit
to return to the 6G Terminal Lite software.
Note
If only one Comms Port connection has been used, close the DAS program by selecting Exit
Program, disconnect the DAS connection from the Comms Port and replace it with the CPU
connection on the Dual Serial Cable.
16. On the
6G Setup
tab,
DAS Calibration
pane, click
OFF
.
1. The 6G Terminal Lite software can now be closed.
2. After updating the DAS firmware, power cycle the transponder:
a. Transponders with a battery disconnect fob; connect the fob for >1 minute.
b. Transponders without a battery disconnect fob; disconnect the battery for >1 minute; see
Section 8.8.2 "Disconnecting and Replacing the Battery"
.
Section 10 – Firmware Update
83