SOMMER SPA-2, Руководство пользователя

Страница: 24 / 111

1. Lay out the base-profiles nr. 1…4 and the cross-profiles 7, 11 and 13 as shown in Figure 6 . Con-
sider the viewing direction and the position of the cross-arm supporting the USH-9!
2. When you have verified the correct mounting position, join the base- and cross-profiles with
the provided bolts as shown in the following example. Use the proper Allen-key to slide the
bolts through the holes of the outer side of the base-profiles. Make sure that the knurled
side of the washer faces the head of the bolt and the nut, respectively.
3. Join cross-profile nr. 8 to base-profiles nr. 3 and 4. This profile can be mounted in three dif-
ferent positions as shown in the figure below. The position depends on the expected snow
height and the mounting height of the tilted SPA-sensor. By default, the profile is joined at
position 2.5 m.
ATTENTION The position of cross-profile nr. 8 has to match the mount-
ing position of the tilted SPA-sensor on the mast (see also Mast with
tilted SPA-2-sensor and USH-9 )!
4. Place the U-profiles Nr. 5 between the base-profiles nr.1 and 3, and nr. 2 and 4 using the hori-
zontal bolts mounted to the profiles.
7
In
st
al
la
ti
o
n
24 Manual