SOMMER SPA-2, Руководство пользователя

Страница: 36 / 111

4. Hook the tension spring nr. 20 into the other end of the sliding clamp on cross profile nr.11.
5. Hinge the loop of the cable fixed to the right winch on cross-profile nr. 7 into the other end of
the tension spring.
6. Tighten the spring to a length of 35…36 cm by operating the winch in clockwise direction.
7. Secure the winch by turning the lug into its right position.
8. Secure the sensor cable with the provided clamp as illustrated in the figure below.
9. Attach the 5 plastic clips onto the ribbon-sensor with the supplied bolts. The spaces between
the clips should be equal along the ribbon. Make sure the thickened edges of the ribbon are
7
In
st
al
la
ti
o
n
36 Manual