SOMMER SPA-2, Руководство пользователя

Страница: 33 / 111

3. Hinge the loop of the cable fixed to the left winch on cross-profile nr. 7 into the other end of
the tension spring as shown above.
4. Remove the temporary cable tie that held the hinge on the mast.
5. Tighten the spring to a length of 35…36 cm by operating the winch in clockwise direction.
6. Secure the winch by turning the lug into its right position.
7. Attach the 2 plastic clips onto the ribbon-sensor with the supplied bolts. The clips should be
placed approx. 1 m from each end of the ribbon. Make sure the thickened edges of the rib-
7
In
st
al
la
ti
o
n
Manual 33