45
for a detailed description of the fields in the measurement table
and their options. The configuration of different sensor types is described in Section
8.8
Messages & Actions
In the measurement table described above, limit values can be specified for critical variables. If a limit
value is violated the MRL-7 can perform one of the following actions specified in
Message
Description
off
No action is performed.
Switch
A switch output (
SW
) is closed.
An e-mail is sent to one or more recipients.
text
A SMS message is sent to one or more recipients.
The following screen shot shows an example of the different actions:
As shown in this example, the messages can contain special commands to provide precise information
about the trigger condition. Here,
Wind speed at %sname% is %rval% %cunit%!
is received
as
Wind speed at AWOS_01 is 31.24 m/s!
for a full list of available codes.
The actions can be linked to the measurement table by ticking the corresponding
to 16 actions can be specified and associated with multiple variables.
8.9
Telecommunication modem
For remote communication with the data logger and data transfer the following settings of the MRL-7
modem need to be configured:
Modem function (
Switches the modem functionality on or off.
SIM card PIN (
Either the PIN code of your SIM card or -1 if no PIN is required.
APN address, username and password (
The access point name, username and password of your mobile network provider. Please note, that
some provides do not require a username and password.
In case you do not have the APN information at hand, the Commander software contains a list of most
providers (see
). In the
Special commands
section of the
Parameter (F2)
window click
Select
APN
and choose your provider. After clicking
OK
the APN information will be adopted in the parameter
list. Click
Upload modified parameters to device
to write the changes to the MRL-7.
