SOMMER MRL-7, Руководство пользователя

Страница: 68 / 100

67
all
RECYC,
RECYCM
D+
Adds variables referenced in S-NUM and S-MEA
D-
Subtracts variable referenced in S-MEA from S-NUM
RECYCM
D*
Multiplies variables referenced in S-NUM and S-MEA
D/
Divides variable referenced in S-NUM by S-MEA
DM
Stores current value of variable referenced in S-MEA if variable
in S-NUM reaches a maximum or minimum. Generally used to
record wind direction of wind gusts.

Hint
Multiple commands can be entered by separating them with commas, e.g.
D+,SX01
.
Limit
Optional limit value. By default, the measurement value must exceed the limit to trigger an action. Add
the command
ST
in S-ADD to trigger an action if the measurement value falls below the limit.
Messages
The action to be performed if the measurement value exceeds or falls below the limit set in Limit . The
actions are specified in Messages, table and are referenced by their message number. Multiple actions
can be selected.
H Messages, table
The MRL-7 features a configurable messaging system. Messages are transmitted to defined recipients
whenever a measurement value exceeds or falls below a limit specified in
Limit .
In the messages table up to 16 messages can be configured. Each entry is configured by the parameters
described below:
Message
Defines the type of the message. The following options are available:
Message Description
off No message is sent.
Switch A switch output is closed if a trigger condition is satisfied.
E-Mail
An E-mail is sent to a defined recipient if the trigger condition is satisfied. Not
available with MRL-7 O-Versions.
text
A SMS message is sent to a defined recipient if the trigger condition is satisfied.
Not available with MRL-7 O-Versions.
Recipient
Either the E-mail address or the phone number of the recipient. Country codes of phone numbers are
preceded either by
00 or + , e.g. 0049 or +49 for Germany.
Subject
Subject of the e-mail message, max. 80 characters long. The subject may include content codes as
listed in
Table 13 .