81
J-G-A
Baudrate
Baud rate for the RS-485 interface.
Value range
Default
Unit
1'200 … 115'200
115'200
-
J-G-B
Parity, stop bits
The following combinations of parity and stop bits can be selected:
Parameter
Description
no par, 1 stop (default)
No parity and 1 stop bit
no par, 2 stop
No parity and 2 stop bits
even par, 1 stop
Even parity and 1 stop bit
odd par, 1 stop
Odd parity and 1 stop bit
J-G-C
Minimum response time
Setting of this parameter avoids interference of communication at the RS-485interface. For this pur-
pose the response to a command is delayed by the selected time.
Value range
Default
Unit
0 … 2'000
0
ms
J-G-D
Transmitter warm-up time
The time between the RS-485 interface is switched on and the first data package of a message is sent.
Value range
Default
Unit
0 … 2'000
10
ms
J-G-E
Flow control
Flow control of the RS-485 interface.
Setting
Description
Off
no flow control
XOFF-XON blocking
(default)
XOFF-XON flow control, especially adapted for half-duplex systems
J-G-F
Sending window
If XON-XOFF flow control is activated data are transmitted in blocks with the defined length.
Value range
Default
Unit
50 … 5'000
300
ms
J-G-G
Receiving window
If XON-XOFF flow control is activated data are sent and received in alternation in the specified interval.
