19
6.1.7
Reading and changing a setting
can be read and changed directly on the data logger by performing the
following steps:
1.
Press
until you get to the main menu.
2.
Navigate to
*** Settings ***
with
and
and press
.
3.
Enter the access code by pressing 2x
followed by 2x
.
4.
Navigate to the desired setting with
and
and press
..
5.
Adjust the value with
and
. Hold the keys to increase/decrease the value more quickly.
6.
Confirm with
or abort with
.
Setting
Example Value Description
Station No.
20160111 Station number
Date
06.04.2017 Current date
Time
09:26:28 Current time
Exposure lock
off Access to measurement values
Copy all data
- Copies all internally stored data to a USB flash drive
Erase all data
- Erases all stored data
Continuous M
turn on Continuous Measurement
Adjust Contrast
weak Adjusts the display contrast
Reboot Device
- Reboots the MRL-7
Modem Testmode
-
Tests the internal mobile modem. Only available if a
modem is configured.
GPS fix
-
Stores the current Lat- and Long-coordinates perma-
nently (until next function call or data erase)
Table 6: Settings accessible on data logger
Exposure lock
Controls the access to measurement data. If active, measurement values cannot be accessed. An ex-
ception are values of the manual observer input. Also, copying data to a USB flash drive or to another
device via Bluetooth is blocked.
Copy all data
Copies all stored data to a connected USB flash drive.
Erase all data
Deletes all measurement data from the data logger.
