70
4G
Only 4G telecommunication networks are used to transfer data.
auto (US + CA)
The telecommunication network is selected automatically. Applies to the US
and Canada only.
I-B-C
Foreign operator mcc&mnc
The mobile country code and mobile network code for your home network in case your provider is a
virtual one. If blank, this setting is inactive (default).
I-B-D
Operator select
The network operator to be used.
Setting
Description
auto (default)
The network operator is selected automatically.
home
Only the SIM card’s home network is used.
Prefer home
Preferably, the home network of the selected operator is chosen. If no con-
nection can be established with the home network, another operator is se-
lected automatically.
I-B-E
APN address
The APN of your carrier’s mobile network. The APN can be selected from a list displayed with
Select
APN
in the Commander menu
Special commands
.
I-B-F
APN username
The APN username.
I-B-G
APN password
The APN password.
I-B-H
Custom command 1
AT command sent to the modem, e.g. AT+CSQ to query the radio signal strength. The escape characters
listed in
All AT commands must be answered with an
OK
by the connected modem. Use this function only if
you are familiar with AT commands.
I-B-I
Custom command 2
I-C
Data transmission 1
Configuration of an HTTP or FTP server for data transmission.
A
Target server type
off
B
Data transmission interval
00:10:00
C
Data transmission offset
00:01:09
D
Content
data
E
FTP server name
F
FTP user name
