Making the system settings
3 P ho n e
3101 Phone number 1
Empty
3
OK
1
0
1
OK
3102 Phone number 2
Empty
2
0
1
OK
2
7
8
4
6
9
0
5
9
9
OK
0
OK
If “Phone number 1“ does not respond or if the recipient does
not press “9“ to confirm receipt of the message then the next
number is dialled.
... as for menu
3101
3103 Phone number 3
Empty
3
0
1
OK
... as for menu
3101
3104 Phone number 4
Empty
4
0
1
3
3
3
3
OK
1 yes, 0 no
0
1
1
3
OK
10
1
1
1
3
OK
... as for menu
3101
Inform the recipients of alarm messages that their phone numbers have been stored.
If any of the recipients of an alarm message have a fully unbundled line then they may not always be able
to confirm receipt of the message by pressing “9“ on their telephone.
You can choose that recipients do not have to acknowledge successful receipt of an alarm message; see menu 3110.
The new phone number is stored
(for example) (max. 15 digits)
The number is erased
9950964872
Erased
3. Phone
Num 1
Num 1
Num 2
Num 2
Num 3
Num 3
Num 4
Num 4
Tempo 5'
Tempo 4'
Tempo 3'
Tempo 2'
Tempo 1'
To avoid immediate dial-up if an alarm is triggered by accident :
3111 Dial-up delay
Setting of the delay before dial-up in the event of
intrusion (from 0 to a maximum of 30 seconds),
10 seconds by default
To store:
- either 4 telephone numbers for sending synthesised voice alarm messages by fixed telephone
line (PSTN),
– or 4 SMS numbers for sending alarm SMSs by GSM,
– or a combination of both, if the installation includes the PSTN the GSM module.
31 Alarm sending
To store 4 telephone numbers for sending synthesised voice alarm messages to neighbours’, family
members’ or friends’ mobile or fixed telephones:
310 Voice call by PSTN
1
3
OK
0
1
3
OK
3110 Call with acknowledgement
Used to make settings for sending alarm messages, either by fixed line or GSM.
So that the recipient of a synthesised voice alarm message performs remote acknowledgment
(by pressing “9
“
) or does not acknowledge receipt of an alarm message:
311Call settings
1
1
3
OK
No acknowledgement
0
OK
Acknowledge with “9”
1
OK
(default)
If the recipient of a synthesised voice alarm message has a fully unbundled telephone line, it is essential
to deactivate the acknowledgement of the alarm message. In this case the phone dialer will only cycle
through the 4 stored telephone numbers once (menus 3101 to 3104).
■
31
■
