Every time the alarm is armed or disarmed, the indoor siren emits one or more beeps to indicate that the instruction has been
received successfully.
Before closing the product again, you can cancel the beeps on the indoor siren:
Fixing the sirens
■
20
■
Indoor siren
This should preferably be installed
in the centre of the dwelling to
ensure better sound propagation.
It should be at a high level where
it is difficult to access (e.g.: in the
stairwell, on top of a wardrobe).
1
2
To cancel the
BEEP
s
!
Press the button on the siren for approximately 5 seconds
until the indicator goes off.
To restore the
BEEP
s
!
Press the button on the siren for approximately 5 seconds
until the indicator goes off.
You will hear a
BEEP!
To be better informed of the functioning of your system, we recommend that you leave the
beeps active on at least one device.
... 5 s
... 5 s,
BEEP!
Outdoor siren
with flash
The outdoor siren with flash is protected against running water, condensation
and humidity provided that it is mounted the right way up (flash upwards).
To ensure optimum battery life, it is advisable to install it sheltered from
sunlight and water.
1
During wall installation, suspend the top
of the cover on the bottom of the base.
Before closing the outdoor
siren with flash again, you can
cancel its beeps (see boxed text
2
,
indoor siren, above).
3
Close the cover again.
4
Close the cover again.
3
Ø 6 mm
Insert the batteries,
making sure they are
the right way round (+/-).
2
Remove the batteries before installation.
