Installing the batteries
2/ Insert the batteries provided in all the devices
A beep sounds when the batteries are installed in the indoor siren and in the central unit/phone dialer, and the red indicator light
flashes on the central unit/phone dialer.
The siren may be triggered when the batteries are installed if you accidentally press the ON button on the remote control.
In this case, just disarm the alarm by pressing OFF on the remote control.
1/ Open the covers of the other devices
Equipment needed to install the devices
Crosshead screwdriver, drill, hammer, pencil, ladder for outdoor siren.
9 V
Pile a
lcali
ne
The batteries are already inserted in the remote controls.
Lithium battery
in the bag with the spacers.
Slide in the battery
with the
+
facing up.
C
ENTRAL UNIT
/P
HONE DIALER
C
ENTRAL UNIT
/
PHONE
DIALER
I
NDOOR SIREN
I
NDOOR SIREN
O
UTDOOR SIREN WITH FLASH
S
MOKE DETECTOR
Do not close the covers straight away.
If the wall installation of the products has to be postponed, remove one battery from the products that are still open
to prevent them from draining.
Make sure that the batteries are inserted the right way
round (+/-).
Make sure that the ends of the batteries are touching the
battery contacts.
