Storing the devices
■
11
■
1/ Activating the central unit/phone dialer storage mode
If you want to add devices
when the central unit is already installed and the system is already operational
, in order to avoid
opening the central unit/phone dialer, you can enter simplified storage mode by going to menu
753
, (see page 38) or from
the bottom of the “Device list“ page via the alarm’s Internet interface. It only possible to enter storage mode when the system
is disarmed.
If you open the central unit/phone dialer, then you must deactivate the tamper switch by pressing OFF on the remote
control until the indicator goes off.
Press the button
briefly
.
Press the button
briefly
.
To open the memory, press the
PROG
button; the red indicator
lights up.
Press
OFF
.
2/ Storing the devices
(in 2-minute storage mode, you have 2 minutes to store one or more devices)
Maximum of 50 devices per central unit/phone dialer.
A keypad
A badge
A detector
An indoor siren
An outdoor siren with flash
A remote control
On the central unit/phone dialer
1
1
Press the
OFF
button
once:
BEEP!
Pass the badge in front of the LCD
keypad reception area:
BEEP!
To store a 2nd badge, repeat the
same operation.
2
1
Press
OFF
.
1
...
BEEP!
on the central unit.
2
...
BEEP!
on the central unit.
2
2
1
Open the siren.
1
Open the siren.
1
Press.
1
1
1
...
BEEP!
on the central unit.
3
...
BEEP!
on the central unit.
3
...
BEEP!
on the central unit.
2
1
1
...
BEEP!
on the central unit.
2
2
D
ETECTOR FOR
SMALL PETS
A
DDITIONAL
LCD
KEYPAD
C
ONTROL
KEYPAD
You have 2 minutes to store one or more devices.
The 2-minute period is restarted as soon as a
device has been stored. The beep indicates that
the device has been stored in the central
unit/phone dialer.
After this 2- minute period, you must return to
storage mode by pressing the PROG button on the
central unit/phone dialer again.
During this 2-minute period (indicator lit), it is
not possible to test the installation.
...
BEEP!
on the outdoor siren.
4
...
BEEP!
on the indoor siren.
4
