Fixing the devices
The movement detectors are sensitive to heat: to avoid accidental triggering, never point a
movement detector directly towards a window, above or opposite a heat source (radiator,
convection heater or fireplace) or on a veranda.
The areas scanned by the movement
detectors should not intersect.
Operating
precautions
common
to the three
movement
detectors
90°
90°
1
2
3
To protect the greatest possible surface area, the detector can be placed in the corner of the room
2.30 m above the floor
.
This type of detector is not recommended for garage use due to the presence of rodents, which
could cause accidental triggering. In this case, it is better to choose the movement detector for
small pets.
Movement
detector
3
1
Test the device:
For a 2-minute period, the
indicator on the detector lights
up every time something
moves in front of it.
Press the button on the
detector:
BEEP!
Close the cover again.
2
Ø 6 mm
Avoid direct sunlight.
Avoid proximity to air
conditioning, heating, etc.
Avoid steam,
grease and humidity.
4
5
Avoid obstacles
which hide the
detection zone
(curtains,
windows, etc.)
Do not install outdoors.
This type of detector is intended to protect a room in the presence of a dog more than 40 cm high
that does not jump on furniture.
This type of detector is not recommended for garage use due to the presence of rodents, which
could cause accidental triggering. In this case, it is better to choose the movement detector for
small pets.
Movement
detector for
big dogs
110°
1
2
It should preferably be wall-
mounted at a height of 1.20 m
above the floor.
The rest of the installation and testing are
identical to those for the movement detector
(see above).
Ø 6 mm
TOP
BOTTOM
■
13
■
