manualshive.com logo in svg

SOMFY animeo, Руководство по эксплуатации


Поделиться
Скачать
background image

 

animeo KNX 4 AC Motor Controller 

30.01.2019 

 

WM/DRM 220-230 V AC 

 
 

 

 2011-2019, SOMFY Activites SA 

 50 avenue du Nouveau Monde 

 74300 Cluses 

 France  

37/55 

•

 

On/Off 

With a short pressing of the push button at the input A, an “Off” telegram is generated. With a short activity of 
the corresponding push button at the input B, an “On” telegram is generated. This function can be inverted 
by changing over the clamps at the inputs. 

•

 

Toggle/Toggle 

Switching over can be done with a short pressing of the push button at the input A or B. This means that the 
value which is in the corresponding switching object is firstly inverted and is then transmitted. 

H

 See chapter 1 Definitions 

for On (“1”) Off (“0”) Toggle (“1/0”). 

6.8.4  Contact type input A 

Default value: 

 Normally open 

Selection options: 

 Normally open 

 

 Normally closed 

 

With this parameter it is defined which contact type is at the corresponding local input. 
Normally open: The contact at the local input is activated closed and not activated open. 
Normally closed: The contact at the local input is activated open and not activated closed. 

6.8.5  Contact type input B 

Default value: 

 Normally open 

Selection options: 

 Normally open 

 

 Normally closed 

 

With this parameter it is defined which contact type is at the corresponding local input. 
Normally open: The contact at the local input is activated closed and not activated open. 
Normally closed: The contact at the local input is activated open and not activated closed. 

6.8.6  Dimming with 

Default value: 

 Stop telegram 

Selection options: 

 Cyclic intervals 

 

 Stop telegram 

 

•

 

Cyclic intervals 

With a short pressing of the push button at the local input A or B, an “On” or an “Off” telegram is generated 
over the corresponding object (1 bit). With a long pressing of the push button at the local input A brighter 
dimming is done over the corresponding object (4 bit) as long as the push button is pressed. When the push 
button is released on the local input A cyclical sending is stopped. The length of steps and the time duration 
for brighter dimming is made from the parameters “longer push button pressing (dimming)” and “interval for 
cyclical dimming”. 

With a long pressing of the push button at the local input B, darker dimming is done over the corresponding 
object (4 bit) as long as the push button is pressed. When the push button is released on the local input B, 
cyclical sending is stopped. The length of steps and the time duration for darker dimming is made from the 
parameters “longer push button pressing (dimming)” and “interval for cyclical dimming”. 

•

 

Stop telegram 

With a short pressing of the push button at the local input A or B, a telegram is generated over the corre-
sponding object (1 bit). With a long pressing of the push button at the local input A brighter dimming is done 
over the corresponding object (4 bit). With a long pressing of the push button at the local input B, darker dim-
ming is done over the corresponding object (4 bit). When the corresponding push button at the local input A 
or B is released, a stop command is generated. 

 
 

 

Содержание animeo
























































Отзывы:

Нет отзывов

Похожие инструкции для animeo

Natibaby Woven Wrap Instruction Manual preview
Woven Wrap
Бренд: Natibaby Страницы: 24
Narvitech NJ300 User Manual preview
NJ300
Бренд: Narvitech Страницы: 12
Oki B6100n User Manual preview
B6100n
Бренд: Oki Страницы: 18
Stobag Melano TP7000 Manual preview
Melano TP7000
Бренд: Stobag Страницы: 3
texet PowerPack TPB-2112 User Manual preview
PowerPack TPB-2112
Бренд: texet Страницы: 16
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Бренд: Roadmaster Страницы: 12
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Бренд: FORM FIT Страницы: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Бренд: Thule Страницы: 12
Vaxcel T0277 Assembly And Installation Instructions preview
T0277
Бренд: Vaxcel Страницы: 5
Tunturi 14TUSFU272 Owner'S Manual preview
14TUSFU272
Бренд: Tunturi Страницы: 37
Camtraptions PIR V3 Manual preview
PIR V3
Бренд: Camtraptions Страницы: 10
Megacom Pocket Dual Catchmon User Manual preview
Pocket Dual Catchmon
Бренд: Megacom Страницы: 2
Gitzo GT1940C Parts List preview
GT1940C
Бренд: Gitzo Страницы: 1
Abisal Nils Extreme MTW03 User Manual preview
Nils Extreme MTW03
Бренд: Abisal Страницы: 21
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Бренд: Wagan Страницы: 12
Banner PresencePLUS Pro Brochure preview
PresencePLUS Pro
Бренд: Banner Страницы: 2
CROOKED MILL Jr Milton Instructions preview
Jr Milton
Бренд: CROOKED MILL Страницы: 2
Velleman LPP6 Quick Start Manual preview
LPP6
Бренд: Velleman Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды