Sole Fitness S77, Руководство пользователя

Страница: 4 / 36

4
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with
any appliance with a large motor, the GFCI will trip often. Route the power cord away
from any moving part of the treadmill including the elevation mechanism and transport
wheels.
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The maximum
operating temperature specification is 40 degrees c, and humidity is
90% non-condensing
(no water drops forming on surfaces).
Circuit Breakers
: Some circuit breakers used in exercise facilities or homes are not rated for
high inrush currents that can occur when a treadmill is first turned on or even during use. If
your treadmill is tripping the facility or home circuit breaker (even though it is the proper
current rating) but the circuit breaker on the treadmill itself does not trip, you will need to
replace the facility or home breaker with a high inrush type. This is not a warranty defect. This
is a condition we as a manufacture have no ability to control. This part is available through
most electrical supply stores. Examples: Grainger part # 1D237, or available online at
www.squared.com part # QO120HM.
GROUNDING
INSTRUCTIONS
This product must be grounded. If the treadmill should malfunction or breakdown,
ground-ing provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 230 -volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly
grounded outlet is not available. The temporary adapter should be used only until a properly
grounded outlet, (shown below) can be installed by a qualified electrician. The green colored
rigid ear- lug, or the like,
extending
from the adapter, must be
connected to a permanent
ground such as a properly
grounded outlet box cover.
Whenever the adapter is
used, it must be held in
place by a metal screw.