Sole Fitness S77, Руководство пользователя

Страница: 5 / 36

5
IMPORTANT
OPERATION INSTRUCTIONS
NEVER operate this treadmill without reading and completely understanding the results
of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The computer
will obey the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your
household power supply that could damage treadmill components. Unplug the treadmill
during an electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or
stray from walking in the center of the belt; which may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. Treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing
on the belt during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed,
etc.).
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure. Pushing harder is not going to make the unit
go faster or slower. If you feel the buttons are not functioning properly with normal
pressure contact your dealer.
SAFETY
TETHER CORD
A safety tether cord is provided with this unit. ( See Step 6 of Assembly Guide, #63) It is a
simple magnetic design that should be used at all times. It is for your safety should you fall or
move too far back on the tread-belt. Pulling this safety tether cord will stop tread-belt
movement.
To Use:
1. Place the magnet into position on the red portion of the console control head. Your
tread- mill will not start and operate without this. Removing the magnet also secures
the tread- mill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
The magnet has strong enough power to minimize accidental, unexpected stop- ping.
The clip should be attached securely to make certain it does not come off. Be familiar
with its function and limitations. The treadmill will stop, depending on speed, with a
one to two step coast anytime the magnet is pulled off the console. Use the red Stop /
Pause switch in normal operation.